Version 7 Register Setup: Casio
TE-8500, TE-7000 & QT-6000
Below are some basic instructions for setting up a register for
communications with V7. These steps should only be completed by a
certified cash register dealer. In order to set up communications,
dealers must first program the register to allow communications, connect the
register to the PC, and configure the software. Below are instructions
on programming the register, sample cable diagrams to help dealers connect
the register to the PC, and basic installation instructions for the
software.
Register
Programming:
For 8500/7000/6000 Direct Communications Setup – RS232/Serial
PGM Mode:
Select Machine Feature. Then enter I/O Parameter.
Within the I/O Parameter area, program the PC/Modem record number 2 (0002-902)
for a baud rate of 19200. That should be 0000000040.
Cabling:
The cabling specifications for the Version 7 Polling CASIO TE-8500/TE-7000/QT-6000 are
listed below. Modem communications can be conducted using a standard 9
to 25 pin modem cable. The cable diagrams listed below are for RS232
communications.
 Software Setup:
To set up the software, follow the steps
below:
- Download V7 Polling from www.pcpoll.com or if you ordered a CD click
on the V7 Install button.
- Locate and run the file you just downloaded: v7install.exe. (Skip
this step if you have a V7 CD.)
- Click the Next buttons and fill in the required information
on the install screens to install the software.
- Print off or write down your registration information. (This
information will be displayed during the installation.)
- Click Finish to complete a successful installation.
- Contact Sales@pcpoll.com
for a release code. Be sure to include your registration
information from step 4.
- Open the software, by double-clicking on the V7 Polling icon, and
select Polling from the program selector.
- Enter in your release code and click the Update Release Code
button.
- Click the Close button on the release code screen.
- Read/view one of the following documents to learn how to use the
software.
| V7 Documentation |
| a) Click on the Help button in the lower right corner of the V7 Polling
screen. |
| b) View our online tutorials on:
www.pcpoll.com/demo/V7_demo. |
| c) If you ordered a CD, view the tutorials on your installation CD. |
|
